Release Notes for -- Linksys SPA-3000 3.1.18-GW

3000 -- 1 Port FXS, 1 Port FXO, 1 Ethernet Interface

Copyright (C) 2006 by Linksys, a Division of Cisco Systems, Inc.

All Rights Reserved.

* * * * * * * * * * IMPORTANT * * * * * * * * * * * * * * * *  *
* Use of Proprietary Information and Copyright Notice:         *
* This release note document contains proprietary information  *
* that is to be used only by Sipura Technology, Linksys(R),    *
* and Cisco Systems, Inc. customers.  Any unauthorized         *
* disclosure, copying, distribution, or use of this            *
* information is prohibited. This restriction includes         *
* ALL Internet based discussion forums, e.g. DSLreports.       *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  *


========================================
	New Features
========================================

### Since 3.1.18-GW 


  - Avoid reboot following resync if only changes involve Syslog_Server, Debug_Server, Debug_Level.

 -  XML configuration profiles can now specify parameter  values using 'value' attributes in empty tags, instead of enclosing  the value within start and end tags.  Example: <GPP_A value="test"/>

========================================
	Bug Fixes
========================================

### Since 3.1.18-GW 

 - avt marker bit incorrectly inserted in every avt rtp packet, should only appear in the first packet

 - Fixed this problem: nonce count not incremented when reINVITE to  hold/resume inside a dialog

 - Fixed this problem: If first host in route has maddr parameter  specified as host name instead of IP address, we will ignore it.

 - Fixed this problem: Object Statistics debug msg contains   garbage letters for the subscription dialog object pool

 -  Cold reboot on resync if Primary or Seconday DNS params changed.

 -  Added <RFC 2543 Call Hold> config option. Default is yes. If set to "yes", unit will include c=0.0.0.0 syntax in SDP when reINVITE to hold. If set to "no", unit will not include c=0.0.0.0. syntax in SDP when reINVITE to hold. It will always include a=sendonly syntax when reINVITE to hold

 -  If request uid not matching an exisiting server transaction's request uid,   should try to match it against locally configured user id. If it matches, should still  accept that request as belong to the same server transaction.

 - Include "replaces" in Supported header in outbound SIP messages and accept "replaces" in  Require header in inbound SIP messages

 - Fixed this bug: NOTIFY request for refer event during call transfer does not include  subscription-state header that is required per RFC 3265

 - Fixed this bug: SPA does not include RTP-Stat header in BYE after the BYE is challenged

 - Fixed this bug: When unit fails over to secondary proxy during INVITE, the correspnding ACK  might be sent to the primary if <Proxy Fallback Intvl> expires between the INVITE and the ACK.

-- since 3.1.7 --

.   Fixed URL/IP address configured in speed dial problem

.   If inbound INVITE does not have contact header, SPA will
    send 400, but followed by 100, and 180 which is not correct