Firmware Version: $[voice_-5]  

Voice

Broadband Router with 2 Phone Ports    

RT31P2
    
System Information
Host Name: LINKSYS Current IP: $[voice_-24573]
Current Netmask: $[voice_-24572] Domain: $[voice_-24574]
Primary DNS: $[voice_-24570] Current Gateway: $[voice_-24571]
Secondary DNS: $[voice_-24569]
Product Information
Product Name: $[voice_-3] Serial Number: $[voice_-2]
Software Version: $[voice_-5] Hardware Version: $[voice_-4]
MAC Address: $[voice_-1] Client Certificate: $[voice_-8]
Customization: $[voice_-9]  
System Status
Current Time: $[voice_-28672] Elapsed Time: $[voice_-28671]
Broadcast Pkts Sent: $[voice_-28658] Broadcast Bytes Sent: $[voice_-28655]
Broadcast Pkts Recv: $[voice_-28657] Broadcast Bytes Recv: $[voice_-28654]
Broadcast Pkts Dropped: $[voice_-28656] Broadcast Bytes Dropped: $[voice_-28653]
RTP Packets Sent: $[voice_-28670] RTP Bytes Sent: $[voice_-28668]
RTP Packets Recv: $[voice_-28669] RTP Bytes Recv: $[voice_-28667]
SIP Messages Sent: $[voice_-28666] SIP Bytes Sent: $[voice_-28664]
SIP Messages Recv: $[voice_-28665] SIP Bytes Recv: $[voice_-28663]
External IP: $[voice_-28652]
Line 1 Status
Hook State: $[voice_-28416] Registration State: $[voice_-28406]
$[voice_-28405]  $[voice_-28415]
Last Registration At: $[voice_-28414] Next Registration In: $[voice_-28413]
Message Waiting: $[voice_-28412] Call Back Active: $[voice_-28411]
Last Called Number: $[voice_-28410] Last Caller Number: $[voice_-28409]
Mapped SIP Port: $[voice_-28408]
Call 1 State: $[voice_-27904] Call 2 State: $[voice_-27648]
Call 1 Tone: $[voice_-27903] Call 2 Tone: $[voice_-27647]
Call 1 Encoder: $[voice_-27902] Call 2 Encoder: $[voice_-27646]
Call 1 Decoder: $[voice_-27901] Call 2 Decoder: $[voice_-27645]
Call 1 FAX: $[voice_-27900] Call 2 FAX: $[voice_-27644]
Call 1 Type: $[voice_-27899] Call 2 Type: $[voice_-27643]
Call 1 Remote Hold: $[voice_-27898] Call 2 Remote Hold: $[voice_-27642]
Call 1 Callback: $[voice_-27897] Call 2 Callback: $[voice_-27641]
Call 1 Peer Name: $[voice_-27896] Call 2 Peer Name: $[voice_-27640]
Call 1 Peer Phone: $[voice_-27895] Call 2 Peer Phone: $[voice_-27639]
Call 1 Duration: $[voice_-27894] Call 2 Duration: $[voice_-27638]
Call 1 Packets Sent: $[voice_-27893] Call 2 Packets Sent: $[voice_-27637]
Call 1 Packets Recv: $[voice_-27892] Call 2 Packets Recv: $[voice_-27636]
Call 1 Bytes Sent: $[voice_-27889] Call 2 Bytes Sent: $[voice_-27633]
Call 1 Bytes Recv: $[voice_-27888] Call 2 Bytes Recv: $[voice_-27632]
Call 1 Decode Latency: $[voice_-27887] Call 2 Decode Latency: $[voice_-27631]
Call 1 Jitter: $[voice_-27886] Call 2 Jitter: $[voice_-27630]
Call 1 Round Trip Delay: $[voice_-27884] Call 2 Round Trip Delay: $[voice_-27628]
Call 1 Packets Lost: $[voice_-27890] Call 2 Packets Lost: $[voice_-27634]
Call 1 Packet Error: $[voice_-27891] Call 2 Packet Error: $[voice_-27635]
Call 1 Mapped RTP Port: $[voice_-27885] Call 2 Mapped RTP Port: $[voice_-27629]
Line 2 Status
Hook State: $[voice_-28160] Registration State: $[voice_-28150]
$[voice_-28149]  $[voice_-28159]
Last Registration At: $[voice_-28158] Next Registration In: $[voice_-28157]
Message Waiting: $[voice_-28156] Call Back Active: $[voice_-28155]
Last Called Number: $[voice_-28154] Last Caller Number: $[voice_-28153]
Mapped SIP Port: $[voice_-28152]
Call 1 State: $[voice_-27392] Call 2 State: $[voice_-27136]
Call 1 Tone: $[voice_-27391] Call 2 Tone: $[voice_-27135]
Call 1 Type: $[voice_-27387] Call 2 Type: $[voice_-27131]
Call 1 Encoder: $[voice_-27390] Call 2 Encoder: $[voice_-27134]
Call 1 Decoder: $[voice_-27389] Call 2 Decoder: $[voice_-27133]
Call 1 FAX: $[voice_-27388] Call 2 FAX: $[voice_-27132]
Call 1 Remote Hold: $[voice_-27386] Call 2 Remote Hold: $[voice_-27130]
Call 1 Callback: $[voice_-27385] Call 2 Callback: $[voice_-27129]
Call 1 Peer Name: $[voice_-27384] Call 2 Peer Name: $[voice_-27128]
Call 1 Peer Phone: $[voice_-27383] Call 2 Peer Phone: $[voice_-27127]
Call 1 Duration: $[voice_-27382] Call 2 Duration: $[voice_-27126]
Call 1 Packets Sent: $[voice_-27381] Call 2 Packets Sent: $[voice_-27125]
Call 1 Packets Recv: $[voice_-27380] Call 2 Packets Recv: $[voice_-27124]
Call 1 Bytes Sent: $[voice_-27377] Call 2 Bytes Sent: $[voice_-27121]
Call 1 Bytes Recv: $[voice_-27376] Call 2 Bytes Recv: $[voice_-27120]
Call 1 Decode Latency: $[voice_-27375] Call 2 Decode Latency: $[voice_-27119]
Call 1 Jitter: $[voice_-27374] Call 2 Jitter: $[voice_-27118]
Call 1 Round Trip Delay: $[voice_-27372] Call 2 Round Trip Delay: $[voice_-27116]
Call 1 Packets Lost: $[voice_-27378] Call 2 Packets Lost: $[voice_-27122]
Call 1 Packet Error: $[voice_-27379] Call 2 Packet Error: $[voice_-27123]
Call 1 Mapped RTP Port: $[voice_-27373] Call 2 Mapped RTP Port: $[voice_-27117]
 
   
       
System Configuration
Restricted Access Domains:
Enable Web Server:
Enable Web Admin Access: Admin Passwd:
User Password:
Optional Network Configuration
HostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: DNS Query Mode:
Syslog Server: Debug Server:
Debug Level: Primary NTP Server:
Secondary NTP Server:
 
 
        
SIP Parameters
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Reg User Agent Name:
SIP Server Name: SIP Accept Language:
DTMF Relay MIME Type: Hook Flash MIME Type:
Remove Last Reg: Use Compact Header:
Escape Display Name:
SIP Timer Values (sec)
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval:
Stats In BYE:
SDP Payload Types
NSE Dynamic Payload: AVT Dynamic Payload:
G726r16 Dynamic Payload: G726r24 Dynamic Payload:
G726r40 Dynamic Payload: G729b Dynamic Payload:
NSE Codec Name: AVT Codec Name:
G711u Codec Name: G711a Codec Name:
G726r16 Codec Name: G726r24 Codec Name:
G726r32 Codec Name: G726r40 Codec Name:
G729a Codec Name: G729b Codec Name:
G723 Codec Name:
NAT Support Parameters
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:
 
 
        
Configuration Profile
Provision Enable: Resync On Reset:
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
Firmware Upgrade
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
 
 
        
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Distinctive Ring Patterns
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
Distinctive Call Waiting Tone Patterns
CWT1 Cadence: CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
Distinctive Ring/CWT Pattern Names
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
Ring and Call Waiting Tone Spec
Ring Waveform: Ring Frequency:
Ring Voltage: CWT Frequency:
Control Timer Values (sec)
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
Vertical Service Activation Codes
Call Return Code: Blind Transfer Code:
Call Back Act Code: Call Back Deact Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Modem Line Toggle Code:
Referral Services Codes:
Feature Dial Services Codes:
Outbound Call Codec Selection Codes
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
Miscellaneous
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone:
Daylight Saving Time Rule:
FXS Port Impedance:
FXS Port Input Gain: FXS Port Output Gain:
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: Playback ABCD:
Caller ID Method: FXS Port Power Limit:
Synchronized Ring: Caller ID FSK Standard:
 
 
        
Line Enable:
Streaming Audio Server (SAS)
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value: Jitter Buffer Adjustment:
SIP Settings
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Proxy-Require: SIP Remote-Party-ID:
RTP Log Intvl: Restrict Source IP:
SIP Debug Option:
Referor Bye Delay:
Refer Target Bye Delay: Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf: Conference Bridge URL:
Conference Bridge Ports:
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Echo Canc Enable:
G729a Enable: Echo Canc Adapt Enable:
G723 Enable: Echo Supp Enable:
G726-16 Enable: FAX CED Detect Enable:
G726-24 Enable: FAX CNG Detect Enable:
G726-32 Enable: FAX Passthru Codec:
G726-40 Enable: FAX Codec Symmetric:
DTMF Tx Method: FAX Passthru Method:
Hook Flash Tx Method: FAX Process NSE:
Release Unused Codec:
Dial Plan
Dial Plan:
Enable IP Dialing: Emergency Number:
FXS Port Polarity Configuration
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
 
        
Line Enable:
Streaming Audio Server (SAS)
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value: Jitter Buffer Adjustment:
SIP Settings
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Proxy-Require: SIP Remote-Party-ID:
RTP Log Intvl: Restrict Source IP:
SIP Debug Option:
Referor Bye Delay:
Refer Target Bye Delay: Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf: Conference Bridge URL:
Conference Bridge Ports:
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Echo Canc Enable:
G729a Enable: Echo Canc Adapt Enable:
G723 Enable: Echo Supp Enable:
G726-16 Enable: FAX CED Detect Enable:
G726-24 Enable: FAX CNG Detect Enable:
G726-32 Enable: FAX Passthru Codec:
G726-40 Enable: FAX Codec Symmetric:
DTMF Tx Method: FAX Passthru Method:
Hook Flash Tx Method: FAX Process NSE:
Release Unused Codec:
Dial Plan
Dial Plan:
Enable IP Dialing: Emergency Number:
FXS Port Polarity Configuration
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
 
        
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
Ring On No New VM:
 
 
        
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
Ring On No New VM: