System Information
Current IP: 0.0.0.0 Host Name: SipuraSPA
Domain: Current Netmask: 255.255.255.0
Current Gateway: 0.0.0.0 Primary DNS: 192.168.15.1
Secondary DNSs:
 
Product Information
Product Name: RT31P2 Serial Number: CH500D80xxxx
Software Version: 2.0.9(LId) Hardware Version: 0
MAC Address: 000F66xxxxxx Client Certificate: Installed
 
System Status
Current Time: 1/1/2003 12:00:00 Elapsed Time: 00:00:00
Broadcast Pkts Sent: 2 Broadcast Bytes Sent: 684
Broadcast Pkts Recv: 2 Broadcast Bytes Recv: 968
Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0
RTP Packets Sent: 0 RTP Bytes Sent: 0
RTP Packets Recv: 0 RTP Bytes Recv: 0
SIP Messages Sent: 0 SIP Bytes Sent: 0
SIP Messages Recv: 0 SIP Bytes Recv: 0
External IP:
 
Line 1 Status
Hook State: Registration State:
Last Registration At: Next Registration In:
Message Waiting: Call Back Active:
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Call 2 State:
Call 1 Tone: Call 2 Tone:
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Call 2 Type:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
 
Line 2 Status
Hook State: Registration State:
Last Registration At: Next Registration In:
Message Waiting: Call Back Active:
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Call 2 State:
Call 1 Tone: Call 2 Tone:
Call 1 Type: Call 2 Type:
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:

 
System Configuration
Restricted Access Domains:
Enable Web Server:    
Enable Web Admin Access:    Admin Passwd:
User Password:
 
Optional Network Configuration
HostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: DNS Query Mode:
Syslog Server: Debug Server:
Debug Level: Primary NTP Server:
Secondary NTP Server:
   

 
SIP Parameters
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Accept Language:
DTMF Relay MIME Type: Hook Flash MIME Type:
Remove Last Reg: Use Compact Header:
 
SIP Timer Values (sec)
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
 
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
 
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval:
 
SDP Payload Types
NSE Dynamic Payload: AVT Dynamic Payload:
G726r16 Dynamic Payload: G726r24 Dynamic Payload:
G726r40 Dynamic Payload: G729b Dynamic Payload:
NSE Codec Name: AVT Codec Name:
G711u Codec Name: G711a Codec Name:
G726r16 Codec Name: G726r24 Codec Name:
G726r32 Codec Name: G726r40 Codec Name:
G729a Codec Name: G729b Codec Name:
G723 Codec Name:
 
NAT Support Parameters
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:
   

 
Configuration Profile
Provision Enable: Resync On Reset:
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
 
Firmware Upgrade
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
 
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
   

 
Line Enable: SAS Enable:
MOH Server: SAS DLG Refresh Intvl:
NAT Mapping Enable: SAS Inbound RTP Sink:
SIP Port: NAT Keep Alive Enable:
EXT SIP Port: NAT Keep Alive Msg:
SIP TOS/DiffServ Value: NAT Keep Alive Dest:
RTP TOS/DiffServ Value: SIP Debug Option:
Network Jitter Level: SIP 100REL Enable:
Blind Attn-Xfer Enable: Auth Resync-Reboot:
Xfer When Hangup Conf:
 
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Supplementary Service Subscription
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
 
Audio Configuration
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Echo Canc Enable:
G729a Enable: Echo Canc Adapt Enable:
G723 Enable: Echo Supp Enable:
G726-16 Enable: FAX CED Detect Enable:
G726-24 Enable: FAX CNG Detect Enable:
G726-32 Enable: FAX Passthru Codec:
G726-40 Enable: FAX Codec Symmetric:
DTMF Tx Method: FAX Passthru Method:
Hook Flash Tx Method: FAX Process NSE:
Release Unused Codec:
 
Dial Plan
Dial Plan:
Enable IP Dialing:
 
FXS Port Polarity Configuration
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
   

 
Line Enable: SAS Enable:
MOH Server: SAS DLG Refresh Intvl:
NAT Mapping Enable: SAS Inbound RTP Sink:
SIP Port: NAT Keep Alive Enable:
EXT SIP Port: NAT Keep Alive Msg:
SIP TOS/DiffServ Value: NAT Keep Alive Dest:
RTP TOS/DiffServ Value: SIP Debug Option:
Network Jitter Level: SIP 100REL Enable:
Blind Attn-Xfer Enable: Auth Resync-Reboot:
Xfer When Hangup Conf:
 
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Supplementary Service Subscription
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
 
Audio Configuration
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Echo Canc Enable:
G729a Enable: Echo Canc Adapt Enable:
G723 Enable: Echo Supp Enable:
G726-16 Enable: FAX CED Detect Enable:
G726-24 Enable: FAX CNG Detect Enable:
G726-32 Enable: FAX Passthru Codec:
G726-40 Enable: FAX Codec Symmetric:
DTMF Tx Method: FAX Passthru Method:
Hook Flash Tx Method: FAX Process NSE:
Release Unused Codec:
 
Dial Plan
Dial Plan:
Enable IP Dialing:
 
FXS Port Polarity Configuration
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
   

 
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
 
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
 
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
 
Supplementary Service Settings
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
 
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
 
Ring Settings
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len: VMWI Ring Policy:
Ring On No New VM:
   

 
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
 
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
 
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
 
Supplementary Service Settings
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
 
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
 
Ring Settings
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len: VMWI Ring Policy:
Ring On No New VM:
   

 
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
 
Distinctive Ring Patterns
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
 
Distinctive Call Waiting Tone Patterns
CWT1 Cadence: CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
 
Distinctive Ring/CWT Pattern Names
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
 
Ring and Call Waiting Tone Spec
Ring Waveform: Ring Frequency:
Ring Voltage: CWT Frequency:
 
Control Timer Values (sec)
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
 
Vertical Service Activation Codes
Call Return Code: Blind Transfer Code:
Call Back Act Code: Call Back Deact Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Referral Services Codes:
Feature Dial Services Codes:
 
Outbound Call Codec Selection Codes
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
 
 
Miscellaneous
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: FXS Port Impedance:
FXS Port Input Gain: FXS Port Output Gain:
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: Playback ABCD:
Caller ID Method: FXS Port Power Limit:
   
 
Notice :
1. This page is just for internal use
2. It just saves the items that you can see when you click 'Save Settings' button. It is different from sipura's ui.